All centerless grinders feature the following:

  • Remove material rapidly without vibration
  • Contact wheel provides safe consistent grinding area
  • Tool free belt change allows operator to quickly match abrasive to the application
  • Working height adjusts to accommodate operator and material
  • Top grinding table supported by graphite pad increases versatility
  • Tool free adjustment of belt tracking
  • Adjustable tool rest and eye shield
  • Emergency stop
  • Five Year warranty on motor
  • Centerless attachment can be mounted on all belt grinders with a 3″ x 79″ grinding belt
  • Grinds and polishes all pipes or tubes with diameters between 7/8″ – 3″ Ø
  • Detachable spark arrestor for easy cleaning
  • Unique setup allows machine to remain a belt grinder while centerless grinding attachment is mounted
  • Contact wheel and flat grinding surface on top available even with attachment on machine
  • Multiple grit belts may be needed to attain final finish required

b_contact-us-scantool

Dry Centerless Grinders

centerless grinders 75cg

Scantool 75CG Key Features

  • Grinds and polishes tube and pipe 7/8″ – 3″ Ø
  • Smaller diameters 1/4″ – 7/8″ Ø requires Teflon grinding support accessory
  • 3″ x 79″ Grinding belt
  • 24″ Grinding table
  • 8″ x 3″ Contact wheel
  • 4.1 HP Motor / 0.4 HP Centerless Motor
  • Voltages Available:
    Part# 430032137 – 220V 3 phase
    Part# 440032138 – 480V 3 phase
  • 3350 RPM
centerless-grinders-75cgx

Scantool 75CGX Key Features

  • Grinds and polishes tube and pipe 7/8″ – 3″ Ø
  • Smaller diameters 1/4″ – 7/8″ Ø requires Teflon grinding support accessory
  • 3″ x 79″ Grinding belt
  • 24″ Grinding table
  • 8″ x 3″ Contact wheel
  • 4.1 HP Motor / 0.4 HP Centerless Motor
  • Voltages Available:
    Part# 430032237 – 220V 3 phase
    Part# 430032239 – 480V 3 phase
  • 3350 RPM
  • Built-in dust extraction

Wet Centerless Grinder

centerless grinders 75cgc

Scantool 75CGC Key Features

  • Grinds and polishes tube and pipe 3/8″ – 3″ Ø
  • Smaller diameters 1/4″ – 7/8″ Ø requires Teflon grinding support accessory
  • Wet cooling system
  • 3″ x 79″ Grinding belt
  • 24″ Grinding table
  • 8″ x 3″ Contact wheel
  • 4.1 HP Motor / 0.4 HP Centerless Motor
  • Voltages Available:
    Part# 430232149 – 220V 3 phase
    Part# 430232155 – 480V 3 phase
  • 3350 RPM